See stitching line below.
Trim excess.
Press seam open.
Then press the strip along the length wrong sides together.
I roll my binding strip on a tissue paper roll, then thread a ribbon thru the center of the roll and tie it in an overhand knot and slip over my head to hang around my neck. This lets the binding strip roll off the roll without getting all twisted up or falling off your lap and rolling under the table. (Ask me how I know this?)
Trim the excess back and batting from the edge of the quilted top. Beginning about half way down one side of the quilt, leave 8-10" of the binding and begin sewing to the quilt. Place the raw edges against the edge of the quilt top and sew 1/4" seam. (If you have a walking or even feed foot, it is a good idea to use it when sewing on your binding.)
When you get 1/4" from the end of the first side, pivot your piece and sew diagonally off the edge of the quilt at the corner. (above) Then turn your piece, fold back the binding on the diagonal
then fold the binding back along the edge of the next side
and continue sewing to the next corner.
When you get back to the first side, stop sewing at least 12 to 15" before where you began sewing on the binding. Fold back each end of the binding strip and let the folded ends meet in the middle.
I've inserted a piece of white paper here so you can see that they just barely meet. Do not overlap nor leave too much space. Finger press the fold where you will definitely have a crease where it is folded. With the quilt positioned as you were sewing, take the bottom strip and place it right side up. Then take the top strip and place it right side down in the same position you had when you were sewing your binding strips together.
Be sure to match up the folds in both directions. Sew from the top left corner to the bottom right corner just like you did when sewing your binding strips together.
Wednesday, November 30, 2011
Binding
The following instructions are how I make my binding and how I sew it onto my quilt. I'm doing this for the ladies in the quilt class I've been teaching for the past 4 weeks.
Cut your strips (selvage to selvage) 2 1/4" wide. Place one strip right side up and place the second strip across right side down. Leave a small amount at the top of the first strip and to the right of the second strip. Sew diagonally from top left to bottom right.
Friday, July 15, 2011
Look What the Grandkids Made
Thursday, July 14, 2011
Last but not Least
Molly wasn't able to come to my party because Eli was sick. She was sooo disappointed when she found out about the quilts. Her quilt was made from Bonnie Hunter's Roll Roll Cotton Boll Mystery she did beginning last November. It was fun but I can truly say if step 4 (600 half square triangles) had been closer to the front, this baby would have died before it got started!! Colleen also quilted Molly's quilt.

Birthday Quilt #4
Another Birthday Quilt
Happy Birthday to Me Continued
Leslie's quilt is next. She lives in Ohio. I became the owner of some Ohio Star blocks from our local guild, Possum Town Quilters and also some from a Beginner Block Lotto from About.com in September, 2007. I knew I wanted to make a quilt for Leslie with these blocks...it just took me awhile to get it going.
Tuesday, July 12, 2011
Happy Birthday to Me
In honor of my 60th birthday, I presented quilts to each of my grown children. This was a total surprise to them. I treated them to a bed turning of all the quilts then as the last one was uncovered, I let them know which quilt was theirs.
First was Laurie's. She had requested a brown and tan quilt like the one I had made for her daughter. (The grandchildren quilts will follow in a later post.) The pattern used was a Turning Twenty by Tricia Cribbs.
Front
Subscribe to:
Posts (Atom)